Baofeng UV5R
  
Buddy's Quick Programming Guide

This Example:    To program repeater 146.985, minus .600 MHz offset,
100 Hz CTCSS tone, low power level, wide band transmit, into Channel #010

Turn on radio. Radio will announce Frequency Mode or Channel Mode.
If required, press VFO/MR to enter Frequency Mode.
If required, Press A/B to select upper display and Press BAND to choose the VHF range instead of UHF range.


Press
[MENU] + 7 + [MENU]                     Use the key to select "dual-watch OFF"
Press [MENU] + EXIT                                To accept and exit


Press
[MENU] + 1 + [MENU]                     Use the key to select 5.0 KHz Step
Press [MENU] + [EXIT]                              To accept and exit


Enter
146 985                                          The receive frequency

Press
[MENU] + 25 + [MENU]                   Use the key to select Minus Offset (-)
Press [MENU] + [EXIT]                              To accept and exit


Press
[MENU] + 26 + [MENU]                   Use the key to select 00.600 MHz Offset
                                                                  or use Keypad and enter 00600 MHz Offset
Press [MENU] + [EXIT]                              To accept and exit

Press
[MENU] + 1 + 3 + [MENU]               Use the key to select 100.0 Hz Tone
                                                                 
or use Keypad and enter 1000
Press [MENU] + [EXIT]                              To accept and exit


Press
[MENU] + 2 + [MENU]                     Use the key to select LOW Power
Press [MENU] + [EXIT]                              To accept and exit


Press
[MENU] + 5 + [MENU]                     Use the key to select WIDE Bandwidth
Press [MENU] + [EXIT]                              To accept and exit

                            Radio should now operate the repeater if in range

Press [MENU] + 2 + 7 + [MENU]               Enter 010 or Use the key to select 010
Press [MENU] + [EXIT]                              This stores the Receive Frequency

Press [*SCAN] (quick press)                     Display will show Transmit Frequency (146.385)

Press [MENU] + 2 + 7 + [MENU]               Enter 010 (if required)
Press [MENU] + [EXIT]                             This stores the Transmit Frequency


        This method devised by Buddy Brannan (KB5ELV), author of The Eyes-Free Manual




My thanks to Buddy, KB5ELV
for his permission to include this page.

73  John  K3NXU