Retevis  RT-23

Programming Memories
Manually

 
  
 
 




Frequency Mode vs. Channel Mode

These two modes have different functions and often confused.

Frequency Mode - Used for a temporary frequency assignment, such as a test frequency or quick field programming.

Channel Mode - Used for selecting preprogrammed channels.


All programming MUST be done in the Frequency Mode.







Programming Repeater with Standard Offset

146.700 MHz
600kHz  minus offset
CTCSS TX tone 123.0
into channel 99
Change from Menu to Menu by:
-  Pressing  [MENU]
-  Turning the top center knob
-  Once proper menu is selected, Press [MENU]

Set radio to VFO Mode   (Frequency Mode)


      1 4 6 7 0 0    Enter RX Freq
Menu
   1
[M] 5.00K [M]    Frequency Step
Menu
   7
[M] WIDE [M]    Bandwidth
Menu
  19
[M] - [M]    Shift Direction
Menu
  20
[M] 0 0 0 6 0 0 [M]    Offset amount
Menu
  28
[M] Press  *      CTCSS/DCS
    Select CTCSS 123.0 [M]  
 
- Press [MENU]
 
- Press [VFO/MR] for 2 secs
 
- Dial to desired Channel
 
- Press [VFO/MR] for 2 secs
   (Channel saved)


 
 
 

TOP of PAGE
 
Miklor Home
 
Miklor
 


   


Retevis
 
Retevis
RT-23
Dual Band

 
Review