outdoors hunting camping SHTF GMRS radio communications antenna battery electronics scanners digital computer software hardware laptop iPad iPhone eBay music radio
.

 
LX-928
 
Programming Menu Definitions
and Functions
 
 
 
1   
APO
Automatic Power Off
-  Turns transceiver OFF after a set length of inactivity.
 
  
OFF (default)
Minutes
10, 20 > 60, 90
Hours
2, 4, 6, 8 > 16
 
 
2   
APRO
Audio Processing
-  Stored on a per channel Basis.
COMP selects Compander
SCRAMB selects Voice Scrambling.
 
Note: Verify your country's regulations before using the Scrambler Option
 
 
OFF (default)
COMP

SCRAMB
3  
BATSAV
Battery Save
-  Battery save mode lowers current consumption.
 
 
ON / OFF
4  
BC LO
Busy Channel Lockout
-  Determines whether pressing keys on transceiver or DTMF microphone sound an audible confirmation beep when they are pressed.
 
 
ON / OFF
5  
BEEP
Key Beep
-  Enables or Disables 'Beep' tone when key pressed.
 
 
ON / OFF
6  
DTMF *
DTMF signaling
-  Activates or Deactivates the DTMF tone function.
Refer to manual for specific code information. 
 
 
ON / OFF
7  
DW
FM Dual Watch
-  ON allows FM radio and incoming signal to be heard at the same time.
-  OFF will interrupt the FM radio signal when a signal from the main receiver is present.
 
 
ON / OFF
8  
LAMP
Background Lamp
OFF, Backlight is disabled
KEY, Backlight active when Key is pressed and stays on for 5 seconds.
CONT, Backlight is always ON
  
 
OFF
KEY
CONT
9  
LOCK
Key Lock
-  Allows you to lock out selected controls when the MENU key is pressed for 2 seconds.
KEY = Numeric and Function Keys
K+S = KEY + Up/Down Arrows (excluding MENU)
PTT = PTT key
ALL = ALL
 
 
KEY
K+S
PTT
ALL
 
10 
N-SYS
Name - System
-  Determines whether user defined channel names are allowed.
 
  
ON / OFF
11 
N-CHA
Name - Channel
-  Determines whether the name for that channel is displayed.
 
 
ON / OFF
12  
N-EDIT
Name - Edit
-  User Edit - Used for programming the channel names.
Up to 6 characters allowed.
 
 
 
13
OPEN-D
Opening Display
-  Determines what is displayed during Power Up.
 
 
ALL
SYS
USER
NULL
14
P1 LO
P1 Long
-  Refer to Programming Key procedure
"Hot Keys" 
 
 
 
15
P1 SH
P1 Short
-  Refer to Programming Key procedure
"Hot Keys"
  
 
16
P2 LO
P2 Long
-  Refer to Programming Key procedure
"Hot Keys"
  
 
17
P2 SH
P2 Short
-  Refer to Programming Key procedure
"Hoy Keys"
  
 

18
PTT ID
PTT Identifier
-  Allows you to sendt up to a six digit code to identify your specific transceiver.  
Note: This is for Commercial Applications.
 
  
ON / OFF
19
PSWD
Password
-  If ON, requires a password at PowerOn.
 
 
ON / OFF
20
PSWD W
Password
-  Used to edit password (above)
 
  
4 Digits
21
ROGER
Roger
ON send a 'Roger' beep at the end of a transmission.
 
 
ON / OFF
22
RPTSET
Repeater Offset
-  Determines frequency spacing between TX and RX
 
 
05.000 MHz to
69.995 MHz
23
SCN MD
Scan Mode
-  Allows you to Scan selected channels.
TO stops when channel is active, pauses for 5 seconds, and continues, even is channel is still active.
CO stops when channel is active, then continues to scan 2 seconds after the channel is clear.
 
  
CO / TO
24
TAIL
Squelch Tail Elimination
-  Eliminates the noise burst at the end of a transmission. ON enables the feature 
OFF disables the feature.
 
 
ON / OFF
25
TOT
Time out Timer
-  Transmitter 'Times Out' to prevent accidental lengthy transmissions. Options are 10 second intervals from 10 to 120 seconds.
 
 
OFF
10, 20 > 120
seconds
26
TXSTOP
Transmit Stop
-  ON  disables the transmitter
-  OFF enables the transmitter
 
 
ON / OFF
27
VOX D
VOX Delay
-  Delay time before returning to receive mode.
Delay can be set from 1 to 4 seconds (default is 3)
 
 
1S, 2S, 3S, 4S
28
VOX S
VOX Sensitivity
-  Determines the Sensitivity of the VOX.
There are 8 levels of sensitivity
1 = Most Sensitive
8 = Least Sensitive
 
 
1, 2 > 8
default = 3
29
VXB
VOX Stop
-  ON prevents receiver from activating VOX.
-  OFF disables the feature.
 
 
ON / OFF
30
WIDNAR
Bandwidth Selection
-  Determines power level for that channel
 
 
WIDE
NARR
   
Function Keys
 
 
F + 1   SQL
 
 
Squelch Level 0 > 9
F + 2   L/H
 
 
High / Low Power High
Low
F + 3   SAVE
 
 
Enable / Disable Save Function
F + 4   STEP
 
 
Sets Frequency Step  (VFO mode) 2.5,  5,  6.25,
10,  12.5,  25
F + 5   REV
 
 
Reverse TX and RX  (MR mode)
F + 6   SQT
 
 
Squelch Mode OFF     CTC
NDCS  IDCS
F + 7   VOX
 
 
Voice Operated Transmitter Enable
Disable
F + 8   FM
 
 
Activate FM Radio (87.5 > 108 MHz)
F + 9   RPT
 
 
Repeater Set  (VFO mode) SING
RPT -
RPT +
F + 0   ADD
 
 
Scan Add  (MR or CH mode)
F + VM
 
 
Stores current frequency to a memory channel
F +  *
 
 
Scan by Step  (VFO mode), by Channel (MR mode)
 
 'Power On' Functions
 
 
PowerOn +
     V/M
 
Switch between VFO/MR mode and CH mode
PowerOn +
   MENU
 
Access Reset Function All Reset
Set Reset
Delete Channel
PowerOn +
      ^
Displays Power On Message  
Press / Hold
   MENU
 
Locks the Keypad  




TOP of PAGE
 
Miklor Home
 
Miklor