outdoors hunting camping SHTF GMRS radio communications antenna battery electronics scanners digital computer software hardware laptop iPad iPhone eBay music radio
.

 

Programming Memories
Manually
 
 UV- 25X2, 25X4, 50X2
 
 
 




Frequency Mode vs. Channel Mode

These two modes have different functions and often confused.

Frequency Mode (VFO) - Used for a temporary frequency assignment, such as a test frequency or quick field programming if permitted.

Channel Mode (MR) - Used for selecting preprogrammed channels.

All programming MUST be initially done in the Frequency Mode only. From there you have the option of assigning the entered data to a specific channel for later access in the Channel Mode if desired.
 
Videos

If you have any of the above models, there are programming videos available HERE.
 




Display Format
for Display A, B, C, D
  
(can be set in either VFO or MR mode)

Menu
27
[M]   Freq, Name,
Channel
[M]   [EXIT]  Select format for Display A
         
Menu
28
[M]   Freq, Name,
Channel
[M]   [EXIT]  Select format for Display B
         
Menu
29
[M]   Freq, Name,
Channel
[M]   [EXIT]  Select format for Display C
         
Menu
30
[M]   Freq, Name,
Channel
[M]   [EXIT]  Select format for Display D
         
 
 

Programming and Storing a
Repeater with Offset
 
RX = 146.850 MHz
TX = 146.250 MHz
 
TX CTCSS tone 123.0
Storing into channel 99
 
 
Set radio to VFO Mode  by pressing [V/M]
     Channel number at the right will disappear.
 
Menu
  45 
[M] 9 9 [M]   [EXIT]  Delete Prior Data in channel
       
Menu
  13
[M] 123.0 [M]   [EXIT]  Select desired TX encode tone
         
Enter     146 850 0 Enter the Receive frequency
     
Menu
  44
[M] 99 [M]   [EXIT]  Enters the Receive channel
         
Enter     146 250 0 Enter the Transmit frequency
Menu
  44
[M] 99 [M]   [EXIT]  Enters the Transmit
         
         
      [V/M]
 
Return to MR Mode
Channel number will re-appear.

 
 

Programming a Repeater
in temporary VFO mode only.
 
RX = 146.850 MHz
TX = 146.250 MHz
 
TX CTCSS tone 123.0
 
 
Set radio to VFO Mode  by pressing [V/M]
     Channel number at the right will disappear.
 
         
       
Enter     146 850 0 Enter the Receive frequency
     
Menu
  13
[M] 123.0 [M]   [EXIT]  Select desired TX CTCSS tone
     
Menu
  46
[M] - [M]   [EXIT]  Select Shift Direction (minus)
     
Menu
  47
[M] 000.600 [M]   [EXIT]  Select Shift Amount
 
 
 
Programming a Simplex Channel

446.000 MHz
into channel 99
 
Set radio to VFO Mode  by pressing [V/M]
     Channel number at the right will disappear.
 
Menu
  45
[M] 99  [M]   [EXIT]  Delete Prior Data in channel
         
Enter     446 000 0 Enter RX in upper display
     
Menu
  44
[M] 99  [M]   [EXIT]  Key in the desired channel
         
      [V/M]
 
Return to MR Mode
Channel number will re-appear.
 
 
 
Entering a Channel NAME
 
Set radio to Channel Mode (MR)  and select channel to edited.
 

Entering a Channel Name

 
Dial in channel to be changed.
Up to 8 characters can be stored.

-  Select   [MENU]  26  [MENU]  
 
-  Use    keys  (or radio dial)  to select the desired character.
-  Press  [# Lock]  button on the keypad.
-  Repeat above until name field is complete.
 
-  Press  [MENU]  to Save.

 
 

TOP of PAGE
 
Miklor Home
 
Miklor