outdoors hunting camping SHTF GMRS radio communications antenna battery electronics scanners digital computer software hardware laptop iPad iPhone eBay music radio
.

   
  BCH-220
 

Programming Memories
Manually

 
 
 
 
 
Frequency Mode vs. Channel Mode
These two modes have different functions and often confused.

Frequency Mode - Used for a temporary frequency assignment, such as a test frequency or quick field programming.

Channel Mode - Used for selecting preprogrammed channels.

All programming
MUST be initially done in the Frequency Mode.
 
 
 
Programming a Repeater Channel with Standard Offsets
 
The example below illustrates entering:

Rx Frequency =
  224.840 MHz
Offset =
  1.600 kHz
TX and RX CTCSS =
  131.8 Hz
Channel 
 25
 
 
You must be in VFO mode to program manually.
PowerOn while Pressing and Holding  [# V/M] until channel number disappears in the upper left.


Enter   2 2 4 8 4 0


OFFSET
[F]    9   scroll      to 
10 OFFSET”
[F]   enter  0 0 1 6 0 0    [F]   [
*]


OFFSET Direction   (+ - OFF)
[F]    5    [F]
   Note: There is no LCD indicator showing direction.
   Quickly key the transmitter and view the display.
   If not the desired option, repeat the above.


CTCSS TX
[F]    8    [
*LOCK]    OFF/CTCSS/DCS   [F]
   Use
   to select desired TX tone (131.8)
[F] to save


CTCSS RX   (if unsure, leave OFF)
[F]    7    [
*LOCK]    OFF/CTCSS/DCS   [F]
   Use    to select desired RX tone (131.8)
[F] to save


Scan Select  (ADD)
[F]    9       1 3  (SCADD)    [F]


Save the channel
[F]    [
*LOCK]    0 2 5   (Enter 3 digit channel number)
[F]  to save


Return to Channel Mode
PowerOn while Pressing and Holding  [# V/M]

This will return you to the Channel mode with alpha display.

 
Deleting an existing channel
 
 
PowerOn while Pressing and Holding   [#VM]
Press  [#VM]   (returns to channel mode)

Select channel to be deleted

PowerOn
while Pressing and Holding   [
*LOCK]

   to select   DEL    [F]    [CLR]

PowerOn while Pressing and Holding   [#VM]

This will return you to the Channel mode with alpha display.


 
Change SCAN MODE
of an existing channel
 
 
Select desired channel to add or delete from the scan list.
PowerOn while Pressing and Holding   [#VM]

Press  [#VM]   (returns to channel mode)

[F]     9     1 3  (SCADD)

[F]   
  (select Add/Del)   [F]    [CLR]

PowerOn while Pressing and Holding   [#VM]
This will return you to the Channel mode with alpha display.



TOP of PAGE
 
Miklor Home
 
Miklor
 


   
 


 

 
 
 
BCH-220

1.25cm 5W
 
 BridgeCom

VHF, UHF
1.25cm
Repeaters