Anytone TERMN-8R / OBLTR-8R
(Terminator / Obliterator)
Programming Memories
Manually
|
Example below will give you
an idea for how the keypad programming works.
Once you are familiar with the flow of the
keypad, other options can be added using the
same technique.
This example demonstrates programming a repeater frequency with:
Frequency 146.840MHz
Repeater with offset - 0.600
CTCSS transmit code 123.0 Hz
Channel Name
Saving the channel 99
|
(Select Display A)
Press *
BAND
to select Upper Display Only
(Set radio to VFO mode)
Press C
V/M (no channel #
appears on right)
(Enter Frequency)
1 4 6 8 4 0 or 1 4 6 8 4 #
(Select Offset Amount)
Not necessary if simplex channel
Press A FUNC
then 8 SET
Press B MAIN / C
V/M to select OFFSET
(OBLTR=13 / TERMN=14)
Rotate channel switch to .600 kHz
TERMN-8R option only:
- Pressing A
FUNC changes increment to 1 MHz
- Pressing A
FUNC again returns to
standard step
Press D ESC to confirm
(Select Offset Direction)
Press
A FUNC
then 4 +/- until
"-" appears on LCD
Press D ESC to confirm
(Enter Transmit CTCSS Tone)
Press A FUNC
then 8 SET
Press B MAIN / C
V/M to select
T-CDC
(Menu 1)
Press 1 FM to select Tone Type
Dial in desired Tone
Press D ESC to confirm
(Enter Channel Name)
Press A FUNC
then 8 SET
Press B MAIN / C
V/M to select
NAME
(OBLTR=14 / TERMN=15)
First character will start flashing
Rotate channel know to select desired character
Press 1
FM to move cursor to the
right
Press 4 +/- to move cursor
to the left
Press D ESC to confirm
(Store Memory Channel)
Press
A FUNC
then C V/M
Rotate channel switch to Channel 99
Press A FUNC
Press and HOLD C V/M
until a Double Beep is heard
Confirm by pressing C
V/M to return to channel
mode.
Type in 0 9 9 to
view the new channel.
Setting CTCSS
/ DCS tone - TX / RX
Normal, GMRS and MURS |
(Enter CTCSS or DCS Tone) Transmit
Only
Press A FUNC
then 8 SET
Press B MAIN / C
V/M to select
T-CDC
(Menu 1)
Press 1 FM to select Tone Type
Dial in desired Tone
Press D ESC to confirm
(Enter CTCSS or DCS Tone) Receive
Only
Press A FUNC
then 8 SET
Press B MAIN / C
V/M to select
R-CDC
(Menu 2)
Press 1 FM to select Tone Type
Dial in desired Tone
Press D ESC to confirm
(Enter CTCSS or DCS Tone) Both
Transmit and Receive
Press A FUNC
then 8 SET
Press B MAIN / C
V/M to select
TR-CDC
(Menu 3)
Press 1 FM to select Tone Type
Dial in desired Tone
Press D ESC to confirm
|
|
|
|
|
|