outdoors hunting camping SHTF GMRS radio communications antenna battery electronics scanners digital computer software hardware laptop iPad iPhone eBay music radio
.

 
Anytone  OBLTR-8R
(Obliterator)
 
Menu Definitions
 
T-CDC CTCSS/DCS
Encode
OFF No CTCSS/DCS Encode  
62.5Hz-254.1Hz + 1 self defined 51 groups fixed CTCSS encode + 1 group self defined encode
000N-777I 1024 groups DCS encode
2 R-CDC CTCSS/DCS
Decode
OFF No CTCSS/DCS Decode  
62.5Hz-254.1Hz + 1 self defined 51 groups fixed CTCSS decode + 1 group self defined decode
000N-777I 1024 groups DCS decode
3 RT-CDC CTCSS/DCS
Encode/Decode Synchronous
OFF No CTCSS/DCS encode / decode  
62.5Hz-254.1Hz + 1 self defined 51 groups fixed CTCSS encode / decode + 1 group self defined encode / decode
000N-777I 1024 groups DCS encode / decode
4 5T-ENC 5TONE Encode List CALL 00-99 100 groups 5TONE encode list  
5 2T-ENC 2TONE Encode List CALL 00-31 32 groups 2TONE encode list  
6 TONDEC Optional Signaling Setup DTMF / 5TONE / 2TONE Current optional signal is DTMF / 5TONE / 2TONE  
7 2T-DEC 2Tone Decode List DEC 00-31 32 groups 2TONE decode list  
8 SIGNAL Squelch mode setup SQ When current channel receives RF signals, transceiver can hear the talking from the other party  
CTCSS/DCS When current channel receives RF signals + matching CTCSS/DCS signaling, transceiver can hear the talking from the other party
TONE When current channel receives RF signals + matching optional signaling, transceiver can hear the talking from the other party
CT&TO When current channel receives RF signals + matching optional signaling + matching CTCSS/DCS signaling, transceiver can hear the talking from the other party
CT/TO When current channel receives RF signals or matching optional signaling or matching CTCSS/DCS signaling, transceiver can hear the talking from the other party
9 STEP Frequency Step Size Setup 2.5 - 50 kHz 9 options in total  
10 W/N Wide / Narrow Band Selection 25 / 12.5 kHz Wideband / Narrowband  
11 REV Frequency Reverse ON TX and RX frequency are interchanged  
OFF No frequency reversal
12 TALKAR Talk Around TX = RX Turn on Talk Around function, current channel transmits on RX frequency, if CTCSS/DCS signaling is set, it will interchange decoding CTCSS/DCS as encoding.  
OFF Close Talk Around function.
13 OFFSET Offset Frequency setup 0-70 MHz Note: It is available to set up in programming software.
RX:UHF, TX:VHF or RX VHF, TX:UHF
 
14 NAME Channel Name a-Z   0-9
In channel name display mode, will display the channel name.  
15 RPLOCK Busy Channel Lockout BUSY
Carrier wave lock, transmitting is prohibited when receiving matching carrier wave.  
REPEAT Signaling lock, transmitting is prohibited when receiving matching carrier but with mismatching CTCSS/DCS.
OFF Close BCLO function.
16 TX TX OFF ON / OFF
TX function enable / disable in current channel  
17 BAND VFO Band Limit ON / OFF Turn ON/OFF the Band limit function  
18 DSPSUB Sub band display FREQ
Display sub band frequency or channel  
VOLT Display current battery voltage
OFF Sub band display disabled
19 BEEP Keypad Voice prompt ON / OFF Turn ON / OFF keypad voice prompt  
20 TOT Time Out Timer OFF
Turn of Time out Timer  
1-27 minutes 27 one minute steps
21 VOX Voice Operated Transmission (VOX) OFF Turn off VOX  
1-10 VOX sensitivity levels
22 VDELAY VOX Delay .5 > 3 seconds One tenth second steps  
23 APO Automatic Power Off OFF
Disable APO  
30 min > 2 hours 30 min,  1 hr,  2 hr
24 DTMF DTMF Transmitting Time 50MS > 500MS
5 levels
50, 100, 200, 300, 500MS
 
25 SQL Squelch Level 00 > 09
10 squelch levels
00 = minimum / normally open
 
26 SCAN Scan Dwell Time 5ST > 15ST
When scanning a matched signal, scan will stop for 5>15 seconds, then resume  
2SP When scanning a matched signal, scan will stop, the resume scanning 2 seconds after signal drops.
27 SPEED Scan Speed QUICK
Fast Scan  
NORMAL Normal Scan
28 FTIME Function Icon Stay Time FUNCT
When finished function setting, or enter into function menu, icon disappears  
1 sec > 3 sec When finished function setting, or enter into function menu, icon remains for 1 > 3 seconds
ALWAYS Function icon remains on display until pressing next function key
29 LIGHT LCD Backlight ON / OFF
Always ON / OFF  
AUTO Backlight remains on for approx 4 seconds
30 COLOR LCD Backlight Color BLU / ORG / PUR
Blue / Orange / Purple  
31 ID Self ID inquiry 001 / 12345 LCD displays radio self ID, DTMF ID is 3 digits, 5TONE ID is 5 digits.  
32 TBST Tone Pulse Frequency Selection 1750, 2100, 1450, 1000Hz
Tone pulse frequency selection  
33 SAVE Battery Save OFF
Turn off battery save  
1:2 > 1:8 Battery save time is 1:2 > 1:8
AUTO Battery save adjusted automatically
34 RADIO FM Radio ON / OFF Allow / prohibit use of FM radio  
35 BAK -- Group Selection 0 > 9 Display current working group  
36 BALK Group Linking OFF
Turn off group linking, menu 37-46 is hidden  
ON Turn on group linking, menu 37-46 is displayed
37 BLK 1 Link Group 1 ON / OFF Add / remove group 1 in group linking  
38 BLK 2 Link Group 2 ON / OFF
Add / remove group 2 in group linking  
39 BLK 3 Link Group 3 ON / OFF
Add / remove group 3 in group linking  
40 BLK 4 Link Group 4 ON / OFF
Add / remove group 4 in group linking  
41 BLK 5 Link Group 5 ON / OFF
Add / remove group 5 in group linking  
42 BLK 6 Link Group 6 ON / OFF
Add / remove group 6 in group linking  
43 BLK 7 Link Group 7 ON / OFF
Add / remove group 7 in group linking  
44 BLK 8 Link Group 8 ON / OFF
Add / remove group 8 in group linking
45 BLK 9 Link Group 9 ON / OFF
Add / remove group 9 in group linking  
46 BLK 0 Link Group 0 ON / OFF
Add / remove group 0 in group linking  
47 PF1 Self Defined PF1 / PF2 key function VOLT
Display current battery voltage  
CALL Call function
ALARM Emergency alarm function
48 PF2 SUBPTT Sub band PTT
OFF No function
MONI Squelch Off Momentary /
Squelch Off function

TOP of PAGE
 
Miklor Home
 
Miklor
 


   
 



Support
Miklor


 

TERMN-8R
Part 90/95
Commercial
GMRS/MURS
& Amateur
XBand Repeater
 
 
OBLTR-8R
Part 90/95
Commercial
GMRS/MURS
& Amateur
 
 
NSTIG-8R
Part 90
Commercial
& Amateur
 
 
ANILE-8R
Part 90
Commercial
& Amateur
 UHF    VHF